GB1 Calibration Kit – ISO 17025
Part # AFGBCALISO
Available Factory Direct
Email us for a quote
Calibration Kit Composition:
AASHTO R18 does not specify the re-certification interval for measurement standards. Therefore, AASHTO follows the recommendation of the manufacturer, which is 12 months for the first calibration and 24 months thereafter for Pine Force Calibration Kits and 24 months for the Pine Height Tubes.
ISO 17025-Certified Calibration:
AASHTO R18-17 Section 188.8.131.52 requires measurement standards, which includes Pine Force Calibration Kits calibrated on or after April 13, 2017 to be calibrated by a laboratory that is ISO 17025-certified to calibrate the Force Calibration Kit according to ASTM E74. The same AASHTO standard section requires Pine Height Tubes calibrated on or after January 1, 2018 to be calibrated by a laboratory that is ISO 17025-certified to calibrate the Height Tube dimension. You may purchase AASHTO R18 from the AASHTO Bookstore. You may acquire ASTM E74 from ASTM International.
Does the ISO 17025 Requirement Affect Your Calibration Kit?
The ISO 17025 Requirement applies to Pine Calibration Kits that meet ALL of the following requirements.
- The Force Calibration Kit calibration date is on or after April 13, 2017.
- The Height Tube calibration date is on or after January 1, 2018.
- You use the Calibration Kit to conduct an official calibration or standardization of your gyratory compactor.
- Your laboratory is AASHTO accredited or is seeking AASHTO accreditation.
Pine Re-Certification Services:
Pine is prepared to serve you with ISO 17025-certified and non-ISO 17025-certified calibrations. Specify the type of calibration that you need when contacting us.
Pine Gyratory Compactor Calibration Services:
The service provided for your Pine Gyratory Compactor by Pine Field Service Technicians will comply with AASHTO R18-17 by using ISO 17025-certified calibration tools as required.